Monitor Dell 27″ SE2725HM, 68.60 cm, Maximum preset resolution: HDMI: 1920 x 1080 up to 100 Hz, VGA: 1920 x 1080 up to 60 Hz, Screen type: Active matrix-TFT LCD, Panel technology: In-Plane Switching (IPS) Technology, Backlight: LED Edgelight System, Faceplate coating: Anti- glare with hard-coating 3H, Aspect Ratio: Full Screen or 4:3, Pixel per inch (PPI): 81, Contrast ratio: 1000:1 (typical), Viewing angle: 178° (vertical) typical, 178° (horizontal) typical, Response Time (Gray to Gray): Normal mode: 8.0 ms (gray to gray), Fast mode: 5.0 ms (gray to gray, Brightness: 250 cd/m² (typical), Color depth: 16.70 million colors, Color gamut: NTSC 72% (CIE 1931) (minimum), Adjustability: Tilt angle -5° to 21°, VESA mounting holes (100 mm x 100 mm behind the VESA cover): Wall-mount the monitor using VESA-compatible wall mount kit, Connectivity: 1 x HDMI port (HDCP 1.4) (supports up to FHD 1920 x 1080, 100 Hz as per specified in HDMI 1.4), 1 x VGA port, Dell Display and Peripheral Manager (DDPM) Compatibility: NO, Security: Security lock slot (cable lock sold separately), Use cable management clip on stand assembly to route the cables that are connected to your monitor, What’s in the box: Display, Stand riser, Stand base, Power cable (varies by country), 1 xHDMI cable (1.80 m), QR card, Safety, Environmental, and Regulatory Information, Dimensions (with stand): Height: 453.71 mm (17.86 in.), Width: 611.10 mm (24.06 in.), Depth: 199.87 mm (7.87 in.), Dimensions (without stand): Height: 361.86 mm (14.25 in.), Width: 611.10 mm (24.06 in.), Depth: 49.22 mm (1.94 in.), Stand dimensions: Height: 190.66 mm (7.51 in.), Width: 290.07 mm (11.42 in.), Depth: 199.87 mm (7.87 in.), Weight: Weight with packaging 6.58 kg (14.50 lb) , Weight with stand assembly and cables 4.40 kg (9.69 lb), Weight without stand assembly (no cables) 3.56 kg (7.84 lb) , 3-Years Advanced Exchange Service and Limited Hardware Warranty